Install Drivers for NXP FRDM-KL25ZBoard

Download driver USB Unknown Device version 5.1.2600.0 for Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, Windows 10 32-bit (x86), 64-bit (x64). File Name USBUNKNOWN.7z USBUNKNOWN.zip.

Download NXP Bluetooth device drivers or install DriverPack Solution software for driver scan and update. The sample code we use to show port I/O from within a device driver acts on general-purpose digital I/O ports; such ports are found in most computer systems. A digital I/O port, in its most common incarnation, is a byte-wide I/O location, either memory-mapped or port-mapped. In this article it is about using that driver with the NXP MCUXpresso IDE and SDK. This article describes how to use HD44780 (or compatible) character displays with the NXP MCUXpresso SDK and the Eclipse based MCUXpresso IDE. With the help of this article you should be able to use these kind of displays for any NXP MCUXpresso SDK project. Basically, at that point it lets you select which drivers you want and includes them in a drivers folder. Eclipse embedded driver nxp-microcontroller asked Jul 1 '20 at 19:17.

The NXP™ FRDM-KL25Z boardhas an open standard embedded serial and debug adapter called OpenSDA.This adapter bridges the serial and debug communications between aUSB host computer and an embedded target processor.

Before you use the NXP FRDM-KL25Z board with the host computer, install the OpenSDA USB drivers.

To install the OpenSDA USB driver:

1. Download and Install the P&E OpenSDA USB Drivers from the site https://www.pemicro.com/opensda/.

   Make sure that you have the latest bootloader and the OpenSDA firmware on your board. To get the latest firmware, refer to the section, Get the Latest Bootloader and the Firmware.

2. Connect a USB cable from your computer to the OpenSDAmini-B USB connector.

   The board appears as a removable storage drive with a volumelabel FRDM-KL25Z.

The MSD Flash Programmer also includes a USB virtualserial port, which requires an .INF file for installation in Windowsplatform. The .INF file is available in the P&E OpenSDA USB Drivers(Step 1) and also on the FRDM-KL25Z removable drive.

To install the USB virtual serial port driver:

1. Open Start menu > Control Panel >Device Manager.

2. Go to ports and check if 'OpenSDA - CDC Serial Port'is available. The driver installation is complete if OpenSDA –CDC exists. Otherwise, you should see 'PEMicro/Freescale - CDC SerialPort' under 'other devices' as shown below.

3. Right click on 'PEMicro/Freescale - CDC Serial Port'and select Update Driver Software.

4. In the Update Driver Software dialog box, select Browsemy computer for driver software. The driver is availablein the P&E OpenSDA driver package that you have installed as wellas on the FRDM-KL25Z removable drive.

5. Point to either location to locate the USB virtualserial driver.

6. Click to complete theinstallation.

   After you install the driver, you will see the serial port forFRDM-KL25Z Board under Ports.

Info:

Model: USB WDM Audio Device Drivers
Vendor: Microsoft
Version: 6.3.9600.16384, v.6.1.7600.16385
Operating system: Windows 7, Windows 8, Windows 8.1
Bits:

Drivers Nxp Port Devices Inc

32-bit (x86), 64-bit (x64)
Driver Date: 2013-08-22
Size: 0.07 mb

Driver description

Download driver

Drivers Nxp Port Devices Bluetooth

USB WDM Audio Device Drivers version 6.3.9600.16384, v.6.1.7600.16385 for Windows 7, Windows 8, Windows 8.1 32-bit (x86), 64-bit (x64).

Screenshot of files

File Name

Drivers Nxp Port Devices Gigabit

wdma_usb.inf_amd64.zip - (0.07 mb) v.6.3.9600.16384 - 22.08.2013

wdma_usb.inf_x86.zip - (0.07 mb) v.6.1.7600.16385 - 13.07.2009

Drivers Nxp Port Devices Price